The sintering furnace LT 02/13 CR is perfectly suited for sintering of cobalt-chromium restorations. The blanks are placed in a special sintering bell and will be heat-treated under argon. The specific design in combination with sintering pearls provides for good sintering results in a nearly oxygen-free atmosphere at very low argon consumption. The system is open and can be programmed for various materials up to sintering temperatures of 1300 °C. Two pre-installed sample programs, which can be adjusted individually. Furthermore, the sintering furnace LT 02/13 CR is designed for a single-phase connection.
- Tmax 1300 °C
- Working temperature up to 1280 °C, depending on the CoCr material
- Single-phase connection
- Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
- Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used
- Gas supply system with 2 solenoid valves and 2 flow meter
- Forced cooling system with compressed air possible
- Sintering bell with good sealing for sintering up to 30 single crowns under argon
- Sintering pearls, Ø 1,25 mm (200 g) included in delivery scope
- Special tongs included in the delivery scope
- Type S thermocouple
- Freely programmable controller C550 allows for automatic temperature control and switching of the gas flow
- Switching system with solid-state-relays to switch the heating
- Possibility to set two gas quantities for optimal adjustment to the sintering process
- Controller with touch operation C550 (10 programs with each 20 segments)
- MyNabertherm App for online monitoring of the firing on mobile devices for free download
- Freeware NTEdit for convenient program input via MS Excel on the PC
- Freeware NTGraph for evaluation and documention of firings using MS Excel on the PC
- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
- Defined application within the constraints of the operating instructions
Additional equipment
- Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
- Process control and documentation via VCD software package for monitoring, documentation and control
Model | Tmax | Inner dimensions in mm |
Volume | Maximum | Outer dimensions in mm5 |
Process flush rate | Connected | Electrical | Weight | Heating time | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
in °C | w | d | h | in l | units | W | D | H1 | l/min | load in kW | connection2 | in kg | in min4 | |
LT 02/13 CR | 1300 | 130 | 120 | 120 | 1,9 | 30 | 422 | 320 (4303) | 430 + 230 | 1.0 | 2.2 | 1-phase | 25 | 35 |
1Including opened lift door 2These furnaces are available for main voltage of 200 V, 208 V, 220 V - 240 V, 1/N/PE or 2/PE 3Including compressed air connection for forced cooling 4Heating time of the empty and closed furnace up to Tmax −100 K (connected to 230 V 1/N/PE rsp. 400 V 3/N/PE) 5External dimensions vary when furnace is equipped with additional equipment. Dimensions on request. |
Inquiry - Sintering Furnace LT 02/13 CR